VItamin-and-Bilby-with-Different-Noises.md

@@ -89,7 +89,21 @@ Then, in response to the suspicion that there may be errors in my previous scrip
 bilby.core.utils.setup_logger(outdir=outdir, label=label)     
 ```
 However this doesn't matter to the results.     
-(ii) Priors are used differently. Priors used by tutorial are:(only different parts are shown)     
+(ii) Setting of start time. In the tutorial, duration is 4 second and start time is set as following:   
+```
+ifos.set_strain_data_from_power_spectral_densities(
+            sampling_frequency=sampling_frequency, duration=duration,
+            start_time=ref_geocent_time-3)     
+```
+Mine:    
+```
+ifos.set_strain_data_from_power_spectral_densities(
+            sampling_frequency=sampling_frequency, duration=duration,
+            start_time=ref_geocent_time-duration/2.0)     
+```
+I think, my way of setting start time is Ok.    
+
+(iii) Priors are used differently. Priors used by tutorial are:(only different parts are shown)     
 ```
 priors['geocent_time'] = bilby.core.prior.Uniform(
     minimum=ref_geocent_time - 0.1,
@@ -108,7 +122,15 @@ priors['geocent_time'] = bilby.core.prior.Uniform(
     maximum=ref_geocent_time + 1,
     name='geocent_time', latex_label='$t_c$', unit='$s$')     
 ```
-(iii) Result function.    
+In this part, the additional specified priors are the correct format from Daniel. However, when I output priors, their distance priors are different:    
+>   
+'luminosity_distance': Uniform(minimum=1000, maximum=5000, name='luminosity_distance', latex_label='$d_L$', unit='$Mpc_{\\odot}$', boundary=None)    
+    
+>
+'luminosity_distance': UniformSourceFrame(minimum=100.0, maximum=5000.0, cosmology=FlatLambdaCDM(name="Planck15", H0=67.7 km / (Mpc s), Om0=0.307, Tcmb0=2.725 K, Neff=3.05, m_nu=[0.   0.   0.06] eV, Ob0=0.0486), name='luminosity_distance', latex_label='$d_L$', unit=Unit("Mpc"), boundary=None)    
+    
+
+(iv) Result function.    
 Tutorial:    
 ```
 result = bilby.run_sampler(