Table of Contents
Kelvin Building new wireless coverage
Wireless coverage from the access points I've installed.
Summary
| AP | Socket | Room | Notes |
|---|---|---|---|
| 014 | 8C/06/42 | 427a | Sky pit |
| 016 | RW2-31 | 209 | Upper switch room. Old AP off |
| 015 | RW2-05 | 204 | Cryo lab. Old AP off in 215 (regular network!!!) |
| 025 | EP4-27 | 462 | Giles' office |
| 023 | WP2-21 | 234a | SUPA meeting room. Old AP off. |
| 024 | RW01/02 | 314a | Goes to panel A1 (cabinet 2) in 405! Old AP off |
| 026 | EP2-42 | 252b | Bryan's office |
| 027 | WP4/02/20 | 470 | Replace cable! Old AP off and disconnected. |
| 028 | RW/01/14 | 211a | JIF control room. Goes to panel A1 (cabinet 2) in 405! |
| 008 | CB-033 | 333 | Doesn't go though the wall to 327a at all! |
| 009 | CB-097 | 327b | Covers 327b and a nicely. |
| 010 | 8D/03/17 | 102a | Lower switchroom (mezzanine) |
| 003 | 8D1/00/12 | 117a | Stores office |
| 002 | RW1-09 | 116 | Only adequate signal through to 116c |
| 004 | RW1-27 | 113b | Also goes down to pit! |
| 043 | Direct | 331 | Connected directly to switch in cabinet 8C. Should cover PhySoc room reasonably. Thick walls round this area. |
| 042 | RW/L2/53 | 210 | SSP FIB/TEM suite |
| 041 | CB-006 | 253 | Meeting room. Had to take faceplate off to get cable into broken CB-005 socket! |
| 073 | 8C/05/05 | 133 | LISA cleanroom. Labelling on socket lies, actually goes to 243d panel 5!!! |
| EP2-28 | 250 | Stefan's office |
Locations
Powerpoint file and PDF file showing locations of UniFi wireless points.
Estimated coverage maps
Note that coverage extends to some rooms which I haven't coloured in, as I don't have access to them.
