====== Kelvin Building new wireless coverage ======

Wireless coverage from the access points I've installed.

===== Summary =====

^AP   ^Socket     ^Room  ^Notes^
|014  |8C/06/42   |427a  |Sky pit   |
|016  |RW2-31     |209   |Upper switch room. Old AP off   |
|015  |RW2-05     |204   |Cryo lab. Old AP off in 215 (regular network!!!)   |
|025  |EP4-27     |462   |Giles' office   |
|023  |WP2-21     |234a  |SUPA meeting room. Old AP off.   |
|024  |RW01/02    |314a  |Goes to panel A1 (cabinet 2) in 405! Old AP off   |
|026  |EP2-42     |252b  |Bryan's office   |
|027  |WP4/02/20  |470   |Replace cable! Old AP off and disconnected.   |
|028  |RW/01/14   |211a  |JIF control room. Goes to panel A1 (cabinet 2) in 405!|
|008  |CB-033     |333   |Doesn't go though the wall to 327a at all!   |
|009  |CB-097     |327b  |Covers 327b and a nicely.   |
|010  |8D/03/17   |102a  |Lower switchroom (mezzanine)         |
|003  |8D1/00/12  |117a  |Stores office   |
|002  |RW1-09     |116   |Only adequate signal through to 116c   |
|004  |RW1-27     |113b  |Also goes down to pit!   |
|043  |Direct     |331   |Connected directly to switch in cabinet 8C. Should cover PhySoc room reasonably. Thick walls round this area.  |
|042  |RW/L2/53   |210   |SSP FIB/TEM suite    |
|041  |CB-006     |253   |Meeting room. Had to take faceplate off to get cable into broken CB-005 socket!    |
|073  |8C/05/05   |133   |LISA cleanroom. Labelling on socket lies, actually goes to 243d panel 5!!!   |
|     |EP2-28     |250   |Stefan's office    |

===== Locations =====

{{:it:unifi_wireless_layout.pptx|Powerpoint file}} and {{:it:unifi_wireless_layout.pdf|PDF file}} showing locations of UniFi wireless points.

===== Estimated coverage maps =====

Note that coverage extends to some rooms which I haven't coloured in, as I don't have access to them.

{{:it:level_1.png|Level 1}}

{{:it:level_2.png|Level 2}}

{{:it:level_3.png|Level 3}}

{{:it:level_4.png|Level 4}}